Company News & Updates
Burette Infusion Set Explained: 100ml & 150ml Sets for Paediatric and NICU IV Therapy
What a burette (volume-control) infusion set is, why paediatric and neonatal teams use 100 ml and 150 ml graduated sets, microdrip drop factor arithmetic, step-by-step clinical use, comparison with standard IV sets and infusion pumps, common buyer mistakes, and the procurement specifications hospital tenders should request — from chamber graduation and drop factor to ISO 8536, CE and ISO 13485 evidence.
Soluset, Buretrol & Volutrol vs Generic Burette Infusion Set: Brand-Name vs OEM Equivalent Guide
Hospital buyers searching for Soluset®, Buretrol®, Volutrol® or Metriset® are almost always looking for the same device class — a paediatric burette / volume-control IV set. This buyer's-side guide explains what each brand refers to, why brand names persist in clinical vocabulary, how to write a brand-neutral tender specification, and what to verify when sourcing an OEM or generic equivalent without trademark exposure.
Hypodermic Needle Selection Guide: Gauge, Length & Bevel for IM, SC, ID Injection & Drug Withdrawal
ISO 6009 hub colour coding (16G to 30G — and why hypodermic 18G is pink while IV cannula 18G is green), length conventions in inches vs millimetres (⅜″ to 2″), bevel geometry (lancet three-facet vs short bevel), needle subtypes (standard, blunt-fill, blunt-tip, insulin pen, safety, micro cannula) and the SKU mix that matches IM, SC, ID injection and drug-withdrawal workflows across adult, paediatric and vaccination procurement.
Oxygen Mask Types Compared: Nasal Cannula, Simple Mask, Venturi & Non-Rebreather
FiO₂ ranges, oxygen flow rates and clinical indications for the five most common oxygen delivery devices — nasal cannula (24–40%), simple mask (40–60%), Venturi mask (precise 24–50%), non-rebreather with reservoir bag (60–90%) and nebulizer mask. Includes COPD vs trauma vs paediatric device selection, sizing, materials (DEHP-free), and the bulk-procurement SKU mix and MOQ for hospital and distributor orders.
FFP2 vs N95 vs KN95 Respirators: A Procurement Comparison Guide
EN 149 vs NIOSH 42 CFR 84 vs GB 2626-2019 — a side-by-side comparison of the three dominant filtering facepiece respirator standards. Filtration efficiency, fit testing, surgical-grade fluid-resistant variants (Surgical N95, Type IIR, GB 19083), MOQ economics for bulk procurement, and the tender-language realities of each standard in EU, US, GCC, MENA, LATAM and ASEAN markets.
Disposable vs Reusable Surgical Gowns: TCO Analysis for Hospitals
AAMI PB70 Level 1-4 explained, SMS / SMMS / spunlace material families compared, the per-use cost arithmetic for disposable vs reusable gowns, infection-control consistency vs sustainability trade-offs, and the bulk-procurement economics for hospital tender SKUs. Includes lifecycle laundering economics and carbon-footprint considerations.
IV Cannula Gauge Selection Guide: 14G to 24G Clinical Use Cases
ISO 6009 colour coding, flow rates by gauge, gauge-by-gauge clinical use cases (trauma, blood transfusion, paediatrics, neonatal), length options, materials (FEP / PUR / PTFE), safety variants and the cost-benefit calculus, and the bulk-procurement SKU mix recommendations for adult, paediatric and ICU wards.
PVC vs Silicone Foley Catheter: When Each Is Appropriate
Material biocompatibility (PVC, 100% silicone, latex), recommended dwell times, French sizing (Fr 6 to Fr 30), balloon volumes (5ml / 10ml / 30ml), tip designs (standard, Tiemann, Couvelaire), 2-way vs 3-way construction, CAUTI prevention, and the bulk-procurement SKU mix for adult, paediatric, urology and long-term-care channels.
Infusion Set Components, Types & Compatibility: A Complete Guide
From the spike to the Luer connector — a component-by-component reference for IV infusion sets. Drop factor selection (10/15/20/60 drops/ml), set types (Luer Lock, Luer Slip, Y-port, burette, blood transfusion), DEHP-free and latex-free material options, ISO 8536-4 / ISO 1135-4 compliance, compatibility with bags, cannulas and pumps, and the procurement specifications that produce correct quotes the first time.
Auto-Disable vs Standard Syringes: WHO PQ Requirements for Vaccination Procurement
A procurement-focused walk-through of auto-disable (AD) syringes for vaccination — the WHO PQS specification E08.IT.05, the ISO 7886-3 standard behind it, the difference between AD, RUP and safety syringes, the tender language buyers should write, and the MOQ and lead time you should expect from a Chinese manufacturer for UNICEF, Gavi or country EPI supply.
Luer Lock vs Luer Slip Syringes: Which to Choose for Your Application
A practical comparison of Luer Lock and Luer Slip disposable syringes — connector anatomy under ISO 80369-7, clinical scenarios where each is preferred, compatibility with needles and IV accessories, and the bulk procurement economics (MOQ, lead time, SKU strategy) that should drive your sourcing decision.
How to Choose a Disposable Syringe Manufacturer for Bulk Import (2026 Guide)
A vetting checklist for distributors and importers: how to specify the right syringe type, what realistic MOQs and lead times look like, certification documents you must verify yourself, and the ten things to test on a sample before placing a production order.
CE vs ISO 13485 vs FDA — A Medical Device Importer's Compliance Guide
What CE Marking, ISO 13485, FDA 510(k), and Free Sales Certificates actually mean — and how they fit together for a medical device importer. Includes how to verify a CE certificate yourself on the EU NANDO database, and the documentation checklist your customs broker will demand.
New Production Line Launched
We are thrilled to announce the successful launch of our state-of-the-art automated production line. This significant investment represents our ongoing commitment to innovation, quality, and meeting the growing global demand for high-quality disposable medical supplies.
The new automated line will boost our overall manufacturing capacity by 40%, allowing us to better serve our global customers and meet increasing market demands. Enhanced quality control features include advanced sensors and AI-powered monitoring systems to ensure consistent product quality.
ISO Certification Renewed
HEZE YINUO MEDICAL has successfully renewed its ISO 13485:2016 certification, demonstrating our unwavering commitment to quality management systems for medical devices.
ISO 13485 is the international standard that specifies requirements for a quality management system specific to the medical devices industry. This certification ensures that our organization consistently meets customer and applicable regulatory requirements. The recertification process involved extensive audits of our manufacturing processes, quality control procedures, and documentation systems.
Medical Expo 2025 Participation
Our team had a fantastic experience at the International Medical Equipment Exhibition 2025, one of the largest healthcare industry events of the year.
The expo provided an excellent platform to showcase our latest innovations and connect with healthcare professionals from around the world. Live demonstrations of our auto-disable syringes and safety injection systems attracted significant interest from healthcare providers and distributors. We established connections with potential partners from over 30 countries, opening doors for expanded global distribution.